Evaluation of Different Techniques and Materials for Filling in 3-dimensional Printed Teeth Replicas with Perforating Internal Resorption by Means of Micro-Computed Tomography.

INTRODUCTION: The aim of this study was to evaluate the filling ability of 2 obturation techniques in 3-dimensional (3D) printed teeth with perforating internal resorption (PIR). METHODS: A maxillary central incisor was instrumented and scanned by micro-computed tomographic (micro-CT) imaging. The 3D model was exported in the stereolithographic format and, with the aid of OrtogOnBlender software (Cícero Moraes, Sinop, SP, Brazil), a PIR in the middle third of the root canal was designed. Thirty-two replicas were printed in surgical resin and distributed into 4 groups (n = 8) according to the obturation technique and the material used: 2 groups used the hybrid technique, 1 with Bio-C Sealer (BCS; Angelus, Londrina, PR, Brazil)/gutta-percha (GP; VDW GmbH, Munich, Germany) + Bio-C Repair (BCR; Angelus, Londrina, PR, Brazil) and the other with BioRoot (BR; Septodont, Saint Maur des Fosses, France)/gutta-percha (GP) + Biodentine (BD; Septodont, Saint Maur des Fosses, France), and 2 groups used the incremental technique, 1 with BCR and the other with BD. Postobturation micro-CT imaging was performed to measure the percentage volume of voids and laser confocal microscopy to measure the surface roughness (µm) of the repair cements. Data were compared using analysis of variance and Kruskal-Wallis tests. RESULTS: Regarding the filling volume in the apical third, the BCS/GP + BCR (89.70 ± 5.15), BR/GP + BD (87.70 ± 8.43), and BCR (84.20 ± 9.00) groups showed the highest percentages compared with the BD group (69.70 ± 6.88) (P < .05). In the area of internal resorption, the BCS/GP + BCR (96.00 ± 2.64) and BCR (95.30 ± 2.93) groups showed the highest percentages compared with the BR/GP + BD group (91.50 ± 1.35) (P < .05). The BD group showed intermediate values that were sometimes similar to the BCS/GP + BCR and BCR groups and similar to the BR/GP + BD group (P > .05). Regarding the quality of the filling in the perforation area, the BCR group showed better results compared with the BD group (P < .001). Regarding roughness, the BCR group (1.66 ± 0.65) showed lower surface roughness compared with the BD group (2.51 ± 0.89) (P < .05). CONCLUSIONS: The capacity and quality of the filling in teeth with PIR were superior with the incremental technique with BCR and the hybrid technique with BCS/GP + BCR.

Chemical and morphological analysis of dentin irradiated by different high-power lasers: a systematic review.

PURPOSE: This systematic review provides an overview of the main chemical and morphological alterations generated on dentin by different high-power lasers' irradiation. METHODS: The review was registered in PROSPERO (CRD42023394164) and PRISMA guidelines were followed. The search strategy was conducted on MEDLINE (PubMed), Embase (Elsevier), and Web of Science (Clarivate) databases. The eligibility criteria were established according to the PICOS strategy, focusing on in vitro and ex vivo studies that assessed the chemical and morphological changes in dentin using five high-power lasers: Nd:YAG (1064 nm), Er:YAG (2940 nm), Er, Cr:YSGG (2780 nm), diode (980 nm), and CO2 (10,600 nm). Publication range was from 2010 to 2022. Data was summarized in tables and risk of bias was assessed by QUIN tool. RESULTS: The search resulted in 2255 matches and 57 studies composed the sample. The methods most used to assess the outcomes were scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman. The studies presented "medium" and "low" risk of bias. The laser prevalently identified was the Er:YAG laser, associated with dentin ablation, absence of smear layer, and exposed tubules. The Nd:YAG laser generated vitreous surface and thermal damage, such as carbonization and cracks. The other lasers caused an irregular surface and no adverse thermal effects. Regarding the chemical structure, only the Er,Cr:YSGG laser caused collagen matrix reduction. The effects found were more intense with higher dosimetry. CONCLUSION: Evidence available indicates that the irradiation of dentin with high-power lasers are related to morphological outcomes favorable to adhesive restorative procedures, with minimal changes in collagen matrix and mineral content. However, those observations should be carried carefully by clinicians and more clinical trials regarding the association of high-power laser irradiation and restorative procedure longevity are needed.

Chemical, morphological and microhardness analysis of coronary dentin submitted to internal bleaching with hydrogen peroxide and violet LED.

BACKGROUND: Violet LED has been used for internal bleaching, however its implications on coronary dentin composition are unclear. The present study aims to evaluate the effect of bleaching with violet LED, either associated with 35 % hydrogen peroxide or not, on microhardness, chemical composition, and morphological characteristics of coronal dentin. METHODS: Thirty maxillary canines were selected to obtain 30 blocks of coronal dentin, distributed in 3 groups (n = 10): 35 % hydrogen peroxide (HP); violet LED (LED); HP 35 % + LED, (HP+LED). The chemical analysis was performed by FTIR and the morphological evaluation of the dentin structure by confocal laser scanning microscopy before (T0) and after treatment (T1). The microhardness analysis was performed by microdurometer after bleaching. The data were submitted to repeated measures ANOVA test (P> 0.05). RESULTS: The intensity of the inorganic peaks decreased after bleaching for all groups (P = 0.003). There was an increase in the organic peak intensity after bleaching with HP, a decrease for LED, while HP+LED did not change the intensity (P = 0.044). Moreover, the inorganic/organic ratio decreased for HP (P = 0.022), while for LED and HP+LED there was no significant changes (P>0.05). HP and HP+LED showed lower microhardness values compared to LED (P< 0.05). Regarding morphological changes, an increase in the perimeter of the dentinal tubules was found for all groups, with the smallest increase being observed for LED. CONCLUSION: HP bleaching decreased the chemical stability and microhardness of the coronal dentin, while the violet LED treatments had no significant impact on dentin stability. In all groups, there was an increase in exposure of the dentinal tubules after bleaching, which was less pronounced with the violet LED bleaching.

An automated method to analyze root filling voids and gaps using confocal microscopy images.

This study evaluated the feasibility of an automated method to delimit the required area to quantitatively analyze root filling voids and gaps from cross-sectional confocal laser scanning microscopy (CLSM) images. Root canals of maxillary canines were prepared with rotary instruments and filled by lateral compaction technique using gutta-percha and AH Plus sealer. The roots were stored (100% humidity, 37 °C) for a period of 24 h and then transversally sectioned to obtain 2-mm-thick slices from the apical and middle thirds. The areas corresponding to filling materials, gaps, and voids were manually delimited or automatically demarked by ImageJ software after converting the images to the RGB color system. Based on manual and automatic delimitations, the percentages of voids and gaps were calculated. Data of voids and gaps between middle and apical thirds were individually compared by paired t-test. Pearson`s correlation test was used to assess the correlation of data between the methods. Irrespective of the method of area delimitation, no difference was observed between the root thirds for both voids and gaps, while the p-values calculated for each method were similar. Almost perfect correlations between the methods were observed for both outcomes. The proposed method to automatically delimit the areas corresponding to filling material, voids, and gaps appears to be a valid method to facilitate the quantitative analysis of defects in root canal fillings using topographic CSLM images.

The investigation of WNT6 and WNT10A single nucleotide polymorphisms as potential biomarkers for dental pulp calcification in orthodontic patients.

The aim of this study is to evaluate if single nucleotide polymorphisms (SNPs) in WNT6 and WNT10A are associated with the risk of dental pulp calcification in orthodontic patients. This cross-sectional study followed the "Strengthening the Reporting of Genetic Association Studies" (STREGA) guidelines. Panoramic radiographs (pre- and post-orthodontic treatment) and genomic DNA from 132 orthodontic patients were studied. Dental pulp calcification (pulp stones and/or pulp space narrowing) was recorded in upper and lower first molars. The SNPs in WNT6 and WNT10A (rs7349332, rs3806557, rs10177996, and rs6754599) were assessed through genotyping analysis using DNA extracted from buccal epithelial cells. The association between pulp calcification and SNPs were analyzed using allelic and genotypic distributions and haplotype frequencies (p<0.05). Prevalence of dental pulp calcification was 42.4% in the 490 studied molars. In the genotypic analysis, the SNPs in WNT10A showed a statistically significant value for molar calcification (p = 0.027 for rs1017799), upper molar calcification (p = 0.040 for rs1017799) (recessive model), and molar calcification (p = 0.046 for rs3806557) (recessive model). In the allelic distribution, the allele C of the SNP rs10177996 in WNT10A was associated with molar calcifications (p = 0.042) and with upper first molar calcification (p = 0.035). Nine combinations of haplotypes showed statistically significant value (p<0.05). The findings of this study indicates that SNPs in WNT10A and WNT6 are associated with dental pulp calcification in molars after orthodontic treatment and may be considered as biomarkers for dental pulp calcification.

Can Carbodiimide (EDC) and Chitosan Cross-linking Agents Effect the Longevity of Fiberglass Posts Luted with Different Types of Composite Cements to Root Dentin?

PURPOSE: To evaluate the effect of carbodiimide (EDC) and chitosan (CHI) on the enzymatic activity (EA) and bond strength (BS) of different composite cements to root dentin. MATERIALS AND METHODS: Ninety (90) maxillary canines were sectioned, standardizing the length of the roots. The roots were endodontically treated, prepared, divided into 3 groups according to dentin treatment (distilled water [DW], CHI 0.2 wt%, or EDC 0.5M), and further subdivided into 3 subgroups according to composite cement (RelyX ARC [3M Oral Care], Panavia F 2.0 [Kuraray Noritaki], or RelyX U200 [3M Oral Care]). Of the slices obtained by sectioning, the most cervical of each third were subjected to a push-out test and the most apical were subjected to in-situ zymography. Half of the slices were analyzed immediately, and the other half after 6 months. The results were analyzed with ANOVA or the chi-squared test. RESULTS: RelyX ARC showed higher BS associated with CHI, while RelyX U200 showed higher BS associated with EDC (p = 0.044). For Panavia F 2.0, the treatment did not influence BS (p > 0.05). For the cervical and middle thirds, no differences were observed between the cements, while the apical third revealed higher BS for RelyX U200 (p < 0.001). The highest percentage of adhesive-to-dentin failures was observed for Panavia F 2.0. EDC showed the lowest percentage of adhesive-to-dentin failures. According to zymographic analysis, DW and CHI showed greater fluorescence for RelyX ARC, while EDC exhibited the lowest fluorescence of all cements (p > 0.05). CONCLUSION: The different mechanisms of action of solutions for pre-treatment of intraradicular dentin yielded different results depending on the adhesive used. EDC resulted in higher bond strength and higher enzyme inhibition for RelyX U200, while the treatment with chitosan resulted in higher bond strength and lower enzymatic activity for RelyX ARC. Although EDC and chitosan treatments did not influence the bond strength for Panavia F 2.0, both resulted in higher enzyme inhibition for this composite cement.

The impact of provisional intraradicular retainers cementation with temporary methacrylate-based resin in the bond strength of glass fiber posts to root dentin.

Chemical composition of temporary cements interferes in the bond strength and quality of the bond interface of glass fiber posts to root dentin. The aim of the present study was to evaluate the influence of different temporary cements on the bond strength of fiberglass posts and resin cement. Thirty-two maxillary central incisor roots were standardized at 15 mm length. The root canals were prepared with Reciproc R50 and filled with a R50 single cone and AH Plus. Ten mm of filling material was removed with a heated Schilder condenser, leaving 5 mm of apical filling material. The roots were randomly distributed into 4 groups (n = 8). In the control group, the root canal was prepared with a standard drill according to the post diameter (DC #1, FGM, Joinville, Brazil), irrigated with 5 mL of distilled water and immediately received the fiberglass post cemented with self-adhesive resin cement. For the other groups, cores were made with temporary intraradicular retainers cemented with different temporary cements: methacrylate-based resin (Bifix Temp - Voco), calcium hydroxide-based (Provicol - Voco) and zinc oxide-based - eugenol-free (Relyx Temp NE - 3M). After 7 days, mechanical removal of the temporary retainers, preparation, irrigation of the root canal and cementation of the fiberglass post were performed, following the same protocol that had been performed in the control group. The roots were sectioned to obtain 3 slices per root third. The most cervical section of each third was used for the push-out test and failure pattern analysis, while the most apical section was subjected to analysis of the adhesive interface by scanning electron microscopy (SEM). The BS data were compared between groups using the two-way ANOVA and Tukey post-test. The failure pattern results were expressed in percentage and compared between groups using the chi-square test and the material adaptation data at the bond interface were evaluated using the Kruskal-Wallis and Dwass-Steel-Critchlow-Fligner tests. The results showed higher BS in the cervical third, with a higher value in the control group (10.8 ± 0.94) and Bifix Temp group (9.78 ± 0.71), with no statistically significant difference between these groups (P > .05). The middle and apical thirds showed no statistically significant difference (P > .05). As regards the type of failure, a higher percentage of mixed adhesive failures was observed for all groups. Analysis of the adhesive interface by SEM showed that the temporary cement Bifix Temp showed greater adaptation at the bond interface. It was concluded that the methacrylate-based resin temporary cement showed the highest bond strength values and best adaptation to root dentin than the zinc oxide-based and calcium hydroxide-based temporary cements.

Vibration therapy as an effective approach to improve bone healing in diabetic rats.

Objective: To investigate the effects of vibration therapy on fracture healing in diabetic and non-diabetic rats. Methods: 148 rats underwent fracture surgery and were assigned to four groups: (1) SHAM: weight-matched non-diabetic rats, (2) SHAM+VT: non-diabetic rats treated with vibration therapy (VT), (3) DM: diabetic rats, and (4) DM+VT: diabetic rats treated with VT. Thirty days after diabetes induction with streptozotocin, animals underwent bone fracture, followed by surgical stabilization. Three days after bone fracture, rats began VT. Bone healing was assessed on days 14 and 28 post-fracture by serum bone marker analysis, and femurs collected for dual-energy X-ray absorptiometry, micro-computed tomography, histology, and gene expression. Results: Our results are based on 88 animals. Diabetes led to a dramatic impairment of bone healing as demonstrated by a 17% reduction in bone mineral density and decreases in formation-related microstructural parameters compared to non-diabetic control rats (81% reduction in bone callus volume, 69% reduction in woven bone fraction, 39% reduction in trabecular thickness, and 45% in trabecular number). These changes were accompanied by a significant decrease in the expression of osteoblast-related genes (Runx2, Col1a1, Osx), as well as a 92% reduction in serum insulin-like growth factor I (IGF-1) levels. On the other hand, resorption-related parameters were increased in diabetic rats, including a 20% increase in the callus porosity, a 33% increase in trabecular separation, and a 318% increase in serum C terminal telopeptide of type 1 collagen levels. VT augmented osteogenic and chondrogenic cell proliferation at the fracture callus in diabetic rats; increased circulating IGF-1 by 668%, callus volume by 52%, callus bone mineral content by 90%, and callus area by 72%; and was associated with a 19% reduction in circulating receptor activator of nuclear factor kappa beta ligand (RANK-L). Conclusions: Diabetes had detrimental effects on bone healing. Vibration therapy was effective at counteracting the significant disruption in bone repair induced by diabetes, but did not improve fracture healing in non-diabetic control rats. The mechanical stimulus not only improved bone callus quality and quantity, but also partially restored the serum levels of IGF-1 and RANK-L, inducing bone formation and mineralization, thus creating conditions for adequate fracture repair in diabetic rats.

Effects of root canal enlargement on unprepared areas and coronal dentine thickness of three-rooted maxillary first premolars with different root configurations: A stepwise micro-CT study.

AIM: To evaluate the effects of progressive root canal enlargements on the unprepared surface area and remaining dentine thickness of three-rooted maxillary first premolars with different root configurations. METHODOLOGY: Thirty three-rooted maxillary first premolars with three root configurations (n = 10) were selected and scanned in a micro-CT device. The root canals were sequentially enlarged with rotary instruments sizes 30.02 (step 1), 30.04 (step 2) and 30.06 (step 3). After each step, a new scan was taken. Analysed parameters included morphometric measurements (length, volume and surface area), number of static voxels and minimal dentine thickness. Statistical analyses were performed with one-way anova post hoc Tukey tests and paired sample t-test at a significance level of 5%. RESULTS: No statistical differences were observed amongst groups regarding the morphometric parameters and static voxels (p > .05). The minimal dentine thickness of the distobuccal root significantly changed depending on the root configuration (p < .05), whilst no differences were observed in the other roots (p > .05). A great variation in the position of the minimal dentine thickness was observed after preparation. Overall, mean percentage reduction in dentine thickness was higher in the buccal roots than in the palatal root (p < .05). In the mesiobuccal and distobuccal root, the number of slices with minimal dentine thickness lower than 0.05 mm increases 2 to 3 times and 3 to 4 times, respectively, from steps 1 to 3. CONCLUSIONS: Instruments sizes 30.02 and 30.04 can be safely and effectively used to enlarge the buccal and palatal canals of three-rooted maxillary first premolars.

Bleaching effect of violet LED of 405-410 nm on stained endodontically treated teeth.

AIM: To evaluate in vitro the whiteness index (WID) and the whiteness index variation (ΔWID), as well as the color stability of stained endodontically treated teeth after bleaching with violet LED (VL) and with hydrogen peroxide 35% (HP) associated or not to VL. METHODS: Twenty-four lower incisors were selected. The color was measured using a spectrophotometer at the following times: baseline, after staining, bleaching, and thermocycling, to determine the whiteness index and variation (WID and ΔWID). For the staining process, the teeth were immersed in human blood and centrifuged. After biomechanical preparation, the specimens were distributed into three groups (n = 8): control group (HP); violet LED (VL); and HP 35% + VL (HP+VL), and one session was performed for both bleaching procedures every week for three weeks, followed by thermocycling, where 10,000 cycles were performed. After color analysis, the data obtained were submitted to statistical analysis (RM ANOVA, p < 0,05). RESULTS: The staining of the teeth reduced the WID values for all experimental groups compared to baseline, and the bleaching protocols increased WID values, with the lowest WID values for group VL. There was no statistically significant difference after thermocycling for all groups compared to bleaching. Staining and thermocycling reduced the ΔWID values, and no difference was found between treatments at these assessment times. Bleaching increased the ΔWID values, with less pronounced changes in the VL group. CONCLUSION: VL used alone has a lower bleaching effect compared to the bleaching treatment with HP, whether or not associated with VL, and the color stability was observed for all groups.

Detection of the internal anatomy of lower anterior teeth using cone-beam computed tomography.

Morphology study of root canal systems is essential for a correct diagnosis, therapy and prognosis of root canal treatment. This study aimed to analyse the dental anatomy of the lower anterior teeth, using cone-beam computed tomography (CBCT). Lower anterior teeth were classified in terms of type, number and location of root canals, evaluating the bilaterality of anatomical occurrences and determining whether the gender and age influence the findings. We analysed 749 CBCT of patients attending the School of Dentistry for different reasons. Spearman's correlations and Wilcoxon signed-rank test were used to analyse data (α = 0.05). There was no significant correlation between gender (male and female) and anatomy of the canals 33 (P = 0.162), 32 (P = 0.815), 31 (P = 0.708), 41 (P = 0.422), 42 (P = 0.382) and 43 (P = 0.063). There was a significant correlation between age and anatomy of the canals 33 (P = 0.045), 32 (P = 0.033), 31 (P = 0.022), 41 (P = 0.000), 42 (P = 0.037) and 43 (P = 0.037). There was no significant correlation between gender and patients' age (P = 0.325). There was no anatomical difference between the bilateral pairs (right and left homologous teeth) (P > 0.05). The most common anatomical configuration was single-canal teeth (85.29%), followed by the configuration in which one canal leaves the chamber, divides into two and unite again (12.88%). Anatomy of the lateral incisors and lower canines does not change with the gender of patients. However, as age rises, single canals and the incidence of division into two canals ending in a single foramen also increases.

Synthesis and characterization of poly(vinyl alcohol)/chondroitin sulfate composite hydrogels containing strontium-doped hydroxyapatite as promising biomaterials.

Novel poly(vinyl alcohol)/chondroitin sulfate (PVA/CS) composite hydrogels containing hydroxyapatite (HA) or Sr-doped HA (HASr) particles were synthesized by a freeze/thaw method and characterized aiming towards biomedical applications. HA and HASr were synthesized by a wet-precipitation method and added to the composite hydrogels in fractions up to 15 wt%. Physical-chemical characterizations of particles and hydrogels included scanning electron microscopy, energy-dispersive spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetry, porosity, compressive strength/elastic modulus, swelling degree, and cell viability. Particles were irregular in shape and appeared to have narrow size variation. The thermal behavior of composite hydrogels was altered compared to the control (bare) hydrogel. All hydrogels exhibited high porosity. HA/HASr particles reduced total porosity without reducing pore size. The mechanical strength was improved as the fraction of HA or HASr was increased. HASr particles led to a faster water uptake but did not interfere with the total hydrogel swelling capacity. In cell viability essay, increased cell growth (above 120%) was observed in all groups including the control hydrogel, suggesting a bioactive effect. In conclusion, PVA/CS hydrogels containing HA or HASr particles were successfully synthesized and showed promising morphological, mechanical, and swelling properties, which are particularly required for scaffolding.

Evaluation of Passive Ultrasonic Irrigation and GentleWave System as Adjuvants in Endodontic Retreatment.

INTRODUCTION: Nonsurgical endodontic retreatment continues to be a challenge in endodontics, particularly when dealing with a complex tooth anatomy. This study evaluated the efficacy of passive ultrasonic irrigation (PUI) and the GentleWave system as supplementary techniques to remove remaining filling materials from oval-shaped root canals. METHODS: Twenty distal roots of human mandibular molars with single and oval-shaped canals were shaped with R40 (40.06) instrument and filled with gutta-percha and AH Plus sealer using warm vertical obturation. Initial filling material removal was performed with R50 (50.05) instrument, followed by the use of PUI (n = 10) or GentleWave system (n = 10). Micro-computed tomographic images were obtained after obturation, initial material removal, and after the use of PUI and GentleWave. The volume of remaining filling material was calculated for the entire canal as well as for the coronal, middle, and apical thirds. Statistical analyses were performed by using analysis of variance, Kruskal-Wallis and Mann-Whitney tests. P ≤ .05 was considered significant. RESULTS: The use of PUI and GentleWave as supplementary techniques significantly reduced the volume of remaining filling material after initial instrumentation (P < .05). However, none of these techniques was able to render canals free from filling materials. PUI showed better performance by removing 18% of the remaining filling material, whereas the GentleWave system was able to remove approximately 10% (P = .02). CONCLUSIONS: The use of supplementary techniques optimized filling material removal after initial instrumentation. PUI enhanced the overall cleaning of the root canal system during endodontic retreatment in oval-shaped canals.

Quantitative Assessment of 2-dimensional Parameters in Tomographic Images by Using Different Segmentation Methods.

INTRODUCTION: The purpose of this study was to assess the accuracy of 2-dimensional morphometric parameters of root canals on different cone-beam computed tomographic (CBCT) images using 2 segmentation methods (operator dependent and Otsu's automatic), considering micro-computed tomographic (micro-CT) images as the reference standard. METHODS: Ten mandibular molars were scanned by micro-CT imaging and 3 different CBCT devices: Accuitomo (J Morita Corporation, Kyoto, Japan), NewTom 5G (CEFLA, Imola, Italy), and NewTom VGi evo (CEFLA). The images were standardized and recorded using MeVisLab software (MeVis Medical Solutions AG, Bremen, Germany). Two calibrated examiners assessed the images of axial reconstructions quantitatively by 2-dimensional parameters (area, perimeter, roundness, and largest and smallest diameter). Fleiss kappa was performed to check interrater and intrarater reliability. The absolute error was calculated as the means and standard deviation. One-way analysis of variance was performed for comparison between the methods used by the operator and Otsu's automatic thresholding. To determine the accuracy of CBCT devices, the absolute error rate of each parameter was calculated using micro-CT measurements as the reference value with thresholding determined by the operator. RESULTS: The thresholding method performed by the operator had lower absolute error values for area, perimeter, and major and minor diameters, differing (P < .05) from Otsu's automatic method, with no differences between the CBCT machines. CONCLUSIONS: An overestimation of area, roundness, and major and minor diameters and an underestimation of the perimeter were shown for the 3 CBCT machines evaluated. Thresholding determined by the operator is more accurate than that determined by Otsu's automatic method for the assessment of 2-dimensional morphometric parameters, which could direct influence in the diagnosis and endodontic treatment plan.

Apical periodontitis healing and postoperative pain following endodontic treatment with a reciprocating single-file, single-cone approach: A randomized controlled pragmatic clinical trial.

This trial assessed post-operative pain and healing of apical periodontitis following endodontic therapy with a reciprocating system compared to a crown-down technique with hand files and lateral compaction filling. One-hundred and twenty nonvital anterior teeth with apical periodontitis were randomly treated using either a reciprocating single file followed by matching-taper single-cone filling or a hand file and lateral compaction filling. Postoperative pain was assessed during the 7 days after the treatment, using a visual analogue scale and a verbal rating scale. Apical healing was assessed using the periapical index score after a 12-month follow-up. The hypothesis tested was that both protocols were equivalent and present similar effectiveness in healing periapical lesions. Data were analyzed through two one-sided tests, t-tests, as well as Mann-Whitney and Chi-squared tests (α = 0.05). Logistic regression was used to investigate the association of clinical and demographic factors with the success of treatment. Regardless of the assessment time, no difference in incidence (38%-43% at first 24h), intensity of postoperative pain, and incidence of flare-up (≈ 3%) was observed between the two endodontic protocols. Both protocols resulted in a similar healing rate of apical periodontitis. After 12 months, the success rate ranged from 73% to 78% and the difference between the treatments fell within the pre-established equivalence margin (-0.1; -0.41 to 0.2). Endodontic treatment combining a reciprocating single file with matching-taper single cone showed similar clinical effectiveness to the treatment using hand-file instrumentation and the lateral compaction filling.

Root Canal Preparation Does Not Induce Dentinal Microcracks In Vivo.

INTRODUCTION: This in vivo study aimed to evaluate the development of dentinal microcracks after root canal preparation of contralateral premolars with rotary or hand instruments using micro-computed tomographic technology. METHODS: Sixty contralateral intact maxillary and mandibular premolars in which extraction was indicated for orthodontic purposes were selected and distributed into positive (n = 6, teeth with induced root microcracks) and negative (n = 6, intact teeth) control groups as well as 2 experimental groups (n = 24) according to the instrumentation protocol: ProTaper rotary (PTR) or ProTaper hand (PTH) systems (Dentsply Maillefer, Ballaigues, Switzerland). After root canal preparation, teeth were extracted using an atraumatic technique and scanned at a resolution of 17.18 µm. A total of 43,361 cross-sectional images of the roots were screened for the presence of dentinal microcracks. The results were expressed as the percentage and number of root section images with microcracks for each group. RESULTS: All roots in the positive control group showed microcracks at the apical third, whereas no cracks were observed in the specimens of the negative control group. In the PTR group, 17,114 cross-sectional images were analyzed, and no microcrack was observed. In the PTH group, dentinal microcracks were observed in 116 of 17,408 cross-sectional slices (0.66%) of only 1 specimen. These incomplete microcracks extended from the external root surface into the inner root dentin at the area of reduced dentin thickness. CONCLUSIONS: Root canal instrumentation with PTR and PTH instruments of contralateral maxillary and mandibular premolars did not result in the formation of dentinal microcracks in vivo.

Brazilian Articles in Top-Tier Dental Journals and Influence of International Collaboration on Citation Rates.

This study investigated the presence of co-authorship from Brazil in articles published in top-tier dental journals and analyzed the influence of international collaboration, article type (original research or review), and funding on citation rates. Articles published between 2015 and 2017 in 38 selected journals from 14 dental subareas were screened in Scopus. Bibliographic information, citation counts, and funding details were recorded for all articles (N=15619). Collaboration with other top-10 publishing countries in dentistry was registered. Annual citations averages (ACA) were calculated. A linear regression model assessed differences in ACA between subareas. Multilevel linear regression models evaluated the influence of article type, funding, and presence of international collaboration in ACA. Brazil was a frequent co-author of articles published in the period (top 3: USA=25.5%; Brazil=13.8%; Germany=9.2%) and the country with most publications in two subareas. The subjects with the biggest share of Brazil are Operative Dentistry/Cariology, Dental Materials, and Endodontics. Brazil was second in total citations, but fifth in citation averages per article. From the total of 2155 articles co-authored by Brazil, 74.8% had no co-authorship from other top-10 publishing countries. USA (17.8%), Italy (4.2%), and UK (3.2%) were the main co-author countries, but the main collaboration country varied between subjects. Implantology and Dental Materials were the subjects with most international co-authorship. Review articles and articles with international collaboration were associated with increased citation rates, whereas the presence of study funding did not influence the citations.

Brazilian articles in top-tier dental journals and influence of international collaboration on citation rates

Abstract This study investigated the presence of co-authorship from Brazil in articles published in top-tier dental journals and analyzed the influence of international collaboration, article type (original research or review), and funding on citation rates. Articles published between 2015 and 2017 in 38 selected journals from 14 dental subareas were screened in Scopus. Bibliographic information, citation counts, and funding details were recorded for all articles (N=15619). Collaboration with other top-10 publishing countries in dentistry was registered. Annual citations averages (ACA) were calculated. A linear regression model assessed differences in ACA between subareas. Multilevel linear regression models evaluated the influence of article type, funding, and presence of international collaboration in ACA. Brazil was a frequent co-author of articles published in the period (top 3: USA=25.5%; Brazil=13.8%; Germany=9.2%) and the country with most publications in two subareas. The subjects with the biggest share of Brazil are Operative Dentistry/Cariology, Dental Materials, and Endodontics. Brazil was second in total citations, but fifth in citation averages per article. From the total of 2155 articles co-authored by Brazil, 74.8% had no co-authorship from other top-10 publishing countries. USA (17.8%), Italy (4.2%), and UK (3.2%) were the main co-author countries, but the main collaboration country varied between subjects. Implantology and Dental Materials were the subjects with most international co-authorship. Review articles and articles with international collaboration were associated with increased citation rates, whereas the presence of study funding did not influence the citations.

Resumo Este estudo investigou a presença de coautoria do Brasil em artigos publicados nos principais periódicos odontológicos e analisou a influência da colaboração internacional, tipo de artigo (artigo original ou revisão) e financiamento nas taxas de citação. Artigos publicados entre 2015 e 2017 em 38 periódicos selecionados de 14 subáreas foram pesquisados no Scopus. Informações bibliográficas, número de citações e detalhes de financiamento foram registrados para todos os artigos (N=15619). Colaboração com outros países no top-10 de publicações em odontologia foi coletada. Médias anuais de citação (MAC) foram calculadas. Um modelo de regressão linear avaliou as diferenças de MAC entre as subáreas. Modelos multinível de regressão linear avaliaram a influência do tipo de artigo, financiamento e presença de colaboração internacional nas MAC. O Brasil foi coautor frequente de artigos publicados no período (top 3: EUA=25,5%; Brasil=13,8%; Alemanha=9,2%) e o país com mais publicações em duas subáreas. As subáreas com maior participação do Brasil foram Dentística/Cariologia, Materiais Dentários e Endodontia. O Brasil foi o segundo no total de citações, porém quinto em citações médias por artigo. Do total de 2155 artigos de coautoria do Brasil, 74,8% não tiveram coautoria de outros países do top-10 de publicação. EUA (17,8%), Itália (4,2%) e Reino Unido (3,2%) foram os principais países coautores, porém o principal país de colaboração variou entre as subáreas. Implantodontia e Materiais Dentários foram as subáreas com mais coautoria internacional. Artigos de revisão e artigos com colaboração internacional foram associados a maiores taxas de citação, enquanto a presença de financiamento do estudo não influenciou as citações.

Efficacy of 3 Supplementary Irrigation Protocols in the Removal of Hard Tissue Debris from the Mesial Root Canal System of Mandibular Molars.

INTRODUCTION: Instrumentation of the mesial root canal system of mandibular molars may hinder disinfection by packing hard tissue debris within the isthmuses. The removal of accumulated hard tissue debris (AHTD) by 3 supplemental irrigation systems, 2 ultrasonically activated and 1 multisonic, was assessed with micro-computed tomographic imaging. METHODS: Twenty-four extracted mandibular molars with 2 mesial canals connected by an isthmus and converging to a single foramen were selected. After preparation of the mesial canals with WaveOne Gold instruments (Dentsply Maillefer, Ballaigues, Switzerland), anatomically matched specimens were assigned to 3 final irrigation protocols (n = 8): intermittent ultrasonic (IU) with an ultrasonically energized 200-µm wire (Irrisafe; Satelec, Bordeaux, France), continuous ultrasonic (CU) with an ultrasonic irrigation needle (ProUltra PiezoFlow, Dentsply Maillefer), and GentleWave (GW) system (Sonendo Inc, Laguna Hills, CA). Specimens were scanned (SkyScan 1176; Bruker-microCT, Kontich, Belgium) at 17.18-µm pixel size before and after preparation and irrigation protocols. Data sets were coregistered, and the percentage reduction of AHTD calculated within the canals and isthmus for each specimen was statistically compared using 1-way analysis of variance and post hoc Tukey tests with a 5% significance level. RESULTS: The mean percentage reduction of AHTD in canals and isthmuses was significantly higher for GW (96.4% and 97.9%, respectively) than for CU (80.0% and 88.9%, respectively) (P < .05). AHTD reduction for IU (91.2% and 93.5%, respectively) did not differ significantly from GW and CU (P > .05). CONCLUSIONS: GW achieved greater efficacy in the removal of AHTD from the mesial root canal system of mandibular molars compared with CU but not IU. The efficacy of CU and IU was comparable.